VACUUM MOTOR MAINTENANCE
1. Contact
Customer Service (1-800-645-2986)
for any
motor maintenance.
2. Vacuum motor brushes should be checked every 250
hours. Brushes should be replaced when they are worn
to a length of 10mm or less.
BATTERY MAINTENANCE
1. Always follow the battery charging directions as outlined
in the BATTERY CHARGING section of this manual.
2. Keep battery tops and terminals free from corrosion. A
strong solution of baking soda and water is the best way
to keep the batteries corrosion free. DO NOT ALLOW
THE BAKING SODA / WATER SOLUTION TO ENTER
THE BATTERY CELLS.
3. Use a wire brush with the baking soda solution to
properly clean the battery posts and connections.
4.
Check battery connections for wear and loose
terminals. Replace if necessary.
MACHINE STORAGE
1. Always store the machine indoors.
2. Always store the machine in a dry area.
3. Always store the machine in its upright position.
4. Always store the machine with the pad driver / brush
raised off the floor.
5. Always store the machine with the squeegee assembly
raised off the floor.
6. If storing in an area which may reach freezing
temperatures, be sure to drain all fluids from the
machine prior to storage. Any damage caused by
freezing temperatures will not be covered by the
warranty.
7. Drain the recovery tank and remove the clear lid on the
top of the recovery tank so that it can "breathe" during
storage.
8. Drain the solution tank of all fluid.
MACHINE OPERATION CONTINUED
9
WARNING
Batteries are dangerous! Batteries emit hydrogen
gas and an explosion or fire can result. Keep
sparks and fire away from batteries at all times.
!
CAUTION
For the best machine performance, keep
batteries charged at all times. Do not let them sit
in a discharged condition.
!
WARNING
Whenever servicing batteries, be sure
to wear protective gloves. Avoid contact with
battery acid at all times!
!
Содержание 261123
