HANDLE RELEASE ASSEMBLY
5
STEP 1
1- Remove nut and spacer from handle
bracket assembly.
2- Push the two handle brackets forward
so they lean against the motor.
STEP 2
1-
Remove handle clamp
blocks with 5mm hex head.
2-
Place handle assembly
into handle clamp blocks.
3- Re-attach the blocks to the
base with 5mm hex head.
STEP 3
1- Place cord wrap assembly (2 pieces) in place, and snug
them together with 6mm hex bolt. (Actual cord wrap faces
to the left of the machine when you are standing behind it.)
2- Assemble hardware in the following order: Spacer, left
handle bracket, nylock nut. (DO NOT overtighten nylock
nut; only tighten it enough to hold handle in place when
compression lever is in down position.)
STEP 4
1- Connect power cords together.
Содержание 261120
Страница 6: ...MODEL 261120 HANDLE GRIP ASSEMBLY 6 PARTS LIST...
Страница 8: ...MODEL 261120 BASE GROUP ASSEMBLY 8 PARTS LIST...
Страница 11: ...MODEL 261120 WIRING DIAGRAM 11...