Global VR Need For Speed GT Deluxe, Системная документация

Страница: 8 / 58

CHAPTER 2 – INSTALLING A NEW CABINET
Standard Cabinet Installation
Standard Cabinet Driving Seat Installation
Locate the hardware used to assemble the driving seat inside the cash box. There are (8x) ¼-20 x 1" hex bolts
with lock washers to secure the seat runners to the cabinet, and (8x) ¼-20 x 1" T-25H Torx bolts with lock
washers and fender washers to secure the driving seat to the runners.
1. The seat runners are installed backwards for shipping. Remove the (4x) hex bolts holding each seat runner
inside the cabinet using a 7/16" socket wrench. See item A in Figure 3 .
2. Pull the seat runners out, flip them over, and reinsert them. Attach the runners using the (4x) hex bolts with
lock washers for each bracket. The angled end of the seat runners should be pointed out and away from
the cabinet as shown in item C of
Figure 3 .
Figure 3 – Installing the Seat Runners
3. Slide the driving seat onto the seat runners. Leave enough space to connect the wire harnesses.
4. Locate the two wire harnesses inside the driving seat and inside the cabinet where the seat runners are
installed. Connect each wire harness together as shown in item A of Figure 4 . The connectors are keyed to
prevent incorrect wiring.
5. Slide the driving seat towards the cabinet while guiding the wire harnesses inside. Attach the driving seat
to the seat runners using (4x) ¼-20 T-25H Torx screws with lock washers and fender washers. Repeat for
each side of the driving seat. See item B of
Figure 4 .
Figure 4 – Attaching the Driving Seat to the Runners
8 GLOBAL VR
040-1201-01 Rev. C 5/28/2004