GLOBAL TRUSS
MANUAL
We would like to thank you for choosing GLOBAL TRUSS trussing and ask for your own safety, to read and
follow these operating instructions carefully, before first start-up.
GENERAL
This trussing left our factory in perfect condition. If transport damages should be present, do not use this
product and contact your specialized dealer. To guarantee a safe practice, the safety and warning notes
listed in these operating instructions must be absolutely considered. Truss systems may only be built and
dismantled by qualified staff. The warranty claim expires with damage, which is caused by neglect of the
instructions. The manufacturer does not assume any liability for the damages resulting from it.
1. DRIFT
• When rigging, dismantling, or servicing the trussing, make sure the area below installation place is blo
cked off.
• Always fix lowered trusses with an appropriate safety-rope.
• Unauthorized modifications on the trussing are forbidden due to safety reasons
1.1 ASSEMBLY
GLOBAL TRUSS products are designed user friendly and offer a convenient assembly. Nevertheless wor-
king with a truss construction requires a certain professional knowledge. Please do not attempt to work
with truss if you are unsure and lack knowledge; contact a rigging specialist for assistance.
1. Check the truss, the truss pins, the conical and the safety clips for any damages. If any piece is da
maged, do not use it and have it examined by a specialist or replace it with an original GLOBAL TRUSS
product.
2. Check that you have all parts.
a. 4-Point systems (e.g. F34) consist of 4 conical, 8 truss pins and 8 safety clips
b. 3-Point systems (e.g. F33) consist of 3 conical, 6 truss pins and 6 safety clips
c. 2-Point systems (e.g. F32) consist of 2 conical, 4 truss pins and 4 safety clips
www.dq.com.au
