51
8)
# make config
.
To configure the linux-wlan-ng-0.1.7 package, run 'make config.' and respond to the questions.
The defaults should be sufficient for most users. 'make config.' must be run after a 'make
clean' and before 'make all'.
9)
To build the package
.
# make all
10)
To install the package
.
# make install
11)
Edit the /etc/pcmcia/wlan-ng.opts file for configuration. These options are set every
time you insert a card.
# cd /etc/pcmcia
# vi /etc/pcmcia/wlan-ng.opts
; Do we want to enable the card at all? It always sets to 'y'.
; Set to 'n' if you wish to load the flash.
WLAN_ENABLE=y
; =======WEP===========================================
; [Dis/En]able WEP. Settings only matter if PrivacyInvoked is true
dot11PrivacyInvoked=false
# true|false
dot11WEPDefaultKeyID=1
# 0|1|2|3
dot11ExcludeUnencrypted=true
# true|false, in AP this means WEP
; Use the generator string to generate keys (just a convenience)
PRIV_GENERATOR=/sbin/nwepgen # nwepgen, Neesus compatible
PRIV_GENSTR="12345"
; or set them explicitly. Set genstr or keys, not both.
dot11WEPDefaultKey0=
#
format:
xx:xx:xx:xx:xx
dot11WEPDefaultKey1=
# e.g. 01:20:03:40:05
dot11WEPDefaultKey2=
dot11WEPDefaultKey3=
; Station Settings (SSID is all we have for now)
; Set the DESIRED_SSID to the SSID of the AP which you want to link.
