manualshive.com logo in svg

Global Specialties PRO-50A, Руководство пользователя

Поделиться
Скачать
Global Specialties PRO-50A Скачать руководство пользователя страница 8

globalspecialties.com

7

Front Panel Description

1.  Display: Displays the measured values, selected function mode, and annunciators.

2.  Power Button: Turns the meter on or off.

3.  10 A: The positive input terminal for up to 10 A current measurement.
4.   mAhFE, TEMP  : The positive input terminal for up to 400 mA, as well as for capacitive 

and temperature measurements.

5.  COM:  The negative (ground) input terminal for all measurement modes. Connection is 

made to it using the black test lead.

6.  VΩHz  : The positive input terminal for voltage, ohms, frequency and diode 

measurements. Connection is made using the red test lead.

7.  Function/Range Rotary Switch: Selects the function and desired range.

8.  Backlight: Press to activate LCD backlight.

9.  HOLD: Displays the current value on the display even if the leads are removed from device 

under test. Pressing the button again returns to current reading measurement mode.

10.  AC Voltage Sensor: Sensor for non-contact AC voltage detection.

11.  AC Voltage Indicator: Indicator LED for AC voltage ≥110 Vrms.

2.    Display Diagram

1

2 3 4

5

6

7

8

9

10

11

12

Figure 2.   Display Diagram

Содержание PRO-50A

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды