Global Specialties LD-200P, Руководство пользователя

Страница: 9 / 20

Front Panel
1. Power button: Power On/Off.
2. V display: Indicates voltage limit or testing voltage value
3. C display: Indicates current setting or testing current value.
4. W display: Indicates power setting or testing power value.
5. Ω display: Indicates resistance setting or testing resistance value.
6. Memory display: Indicates the present data location number in memory.
7. Status display: Indicates the operational state.
8. – Input BNC connector: Negative input terminal.
9. + Input BNC connector: Positive input terminal.
10. GND BNC connector: Ground terminal.
11. CV: “Enter” constant voltage mode.
12. CC: “Enter” constant current mode.
13. CP: “Enter” constant power mode.
14. CR: “Enter” constant resistance mode.
15. 0~9: Data input.
16. “ ! ” : Float point
17. “ ”: “Enter”
18. LOAD button.
19. Push to activate load and LED.
20. Push again to turn off.
21. SHIFT button: Push to access the secondary functions.
22. + (Auto):
+ : Increase the setting value.
Auto: Push [SHIFT][Auto] to change to Auto function.
23. - (Delay):
- : Decrease the setting value.
Delay: Push [SHIFT][Delay] to change to Delay function.
24. " (Store):
"
: Change digit to the left.
Store: Push [SHIFT][Store] to change to Store function.
25. # (Recall):
# :Change digit to the right.
Recall: Push [SHIFT][Recall] to change to Recall function.
26. USB / RS-232 terminal.