Physical Address: Corporate HQ
301 Meuse Argonne | Hicksville, OH 43526
800.782.6761
•
419.542.7751
•
f:
419.542.6690
Global Solutions Distribution Center/Test Kitchen
4300 E Magnolia Street | Phoenix, AZ 85034
October 13, 2020
globalsolutionsfoodequipment.com
E. Set TIMER. Use the UP or DOWN buttons to set
TIMER. Adjust the time from 0
– 180 minutes in
increments of 5. (Press the UP/DOWN buttons
repeatedly to set the TIMER. Or to move quickly
through the timer, press and hold the UP or
DOWN button. If the TIMER is not set, the
induction cooker will function in ON mode for up
to two hours.
5. Timer ON. In order for the timer to be running, TIMER
indicator light must be illuminated. Use the
FUNCTION key to navigate to the time selection and
select a time. Once the desired time has been
selected, let the cooker time and indicator lights blink
until they stay illuminated on their own with no
blinking. The timer is set. The induction cooker will
shut off automatically after the TIMDER reaches “0”.
The cooktop will power down, the fan will cool the
units and shut off. Repeat operations 1-4 to turn the
cooker back on.
6. Turn OFF the cooker and or disconnect power to the
unit after use. After cooking/warming is complete,
press the ON/OFF button to turn off the unit. The
cooker will stop heating the fan will cool the unit down
and will shut off. The power indicator light will remain
illuminated. As long as the ON/OFF indicator light is
illuminated, there is power flowing to the unit. Unplug
the induction cooker completely to disconnect the
power to the unit.
Utensils :
1. Use steel, cast iron, enameled iron, stainless steel
flat-bottomed
pans/pots with diameter from 5” – 10”.
2. Do not use heat-resistant glass, ceramic, copper,
aluminum pans/pots or round bottomed pans or pans
with bottom diameter of less than 5
”.
Cleaning :
NOTE: Proper maintenance plays an important part in the
life span and functioning of the unit.
1. Unplug the cord and let unit cool before cleaning or
moving.
2. Do not use benzine, thinner, scrubbing brush or
polishing powder to clean the induction cooker.
3. Wipe using mild dish washing cleaner and damp
cloth.
4. Do not immerse in water or other liquid. Do not clean
with a water jet.
REPAIR :
To avoid serious injury or damage, do not repair the
induction cooker or replace a damaged power cord
yourself. Repairs must be coordinated through: Global
Solutions customer service at 1-800-782-6761.
TROUBLESHOOTING
E01
Induction cooker
overheats
Clear all obstacles that block the vent under the bottom of the
induction cooker, then placed the cooker in an open area and
try again after the unit cools down.
E03
Voltage under
load/over load
Make sure the voltage and frequency comply with the rating
label shown on the product.
