28
8.12. Acquiring the Measurement Data (Manual Operation)
To record the measurement of the box on the ExpressCube
™
countertop, activate the
ACQUIRE
button on the ExpressCube
™
control panel. Alternatively (if equipped), the handheld scanner will
activate the Acquire sequence while reading the bar code on the package. The acquired data will be
displayed on the ExpressCube
™
control panel display.
If the data is not recorded, an audible beep will be heard. The user should refer to Section 8.7. and
verify that the box is properly positioned for measurement.
"
If the box is removed from the platform without the SEND/PRINT button activated, the
acquired data will be lost and the ExpressCube
™
countertop must return to the zero
condition to start a new measurement.
"
After a successful measurement is acquired, the valid measurement indicators both on
the front panel of the main unit and the ExpressCube
™
control panel are held until a new
measurement procedure is started.
Displayed below is the successful acquired measurement (ACQD) for both control panels.
ExpressCube
™
Controller Display
ExpressCube
™
SizeIt
™
Display
