8
Product Code Structure
The typical product code is MPC-XX-XX. Where the two letters (-xx-)
after “MPC” represent
the type of
pulse input with 4 configuration possibilities available. The two letters at the end (-xx) represent the
type of communication included on the Multi Pulse Counter. This has been illustrated at length in table
4.
Type of Pulse Inputs
Communication
MPC
DD
(All Dry Inputs)
RF
(RF communication card)
DW
(8 dry and 8 Wet Inputs)
WF
(Wi-Fi)
WW
(All Wet Inputs)
M1
(Cat M1 LTE)
CU
(Customized)
ET
(Ethernet)
Table 4: The Product Code Structure
For example, a Multi Pulse Counter that has all 16 inputs configured as dry inputs and utilizes Wi-Fi
communication will be labeled as MPC-DD-WF. Along with the model number, each specific Multi Pulse
Counter has a unique serial number used for identification purposes.
The configuration (dry/wet) of each input terminal block is indicated on the front overlay of the product.
The dry inputs are marked by a Red Dot (
●
) and the wet inputs are marked by a cross (
x
). Be sure to note
this configuration as wiring a wet input to a dry terminal block could damage the device.
IMPORTANT:
Be sure to note this configuration as wiring a wet input to a dry terminal block could
damage the device.
NOTE
: The Product Code and the Serial Number are located on the interior of the Multi Pulse Counter
enclosure and the Serial Number is also located on the front overlay and as shown in Figure 2.
Figure 2: Placement of the Model and Serial number on the interior (left)and exterior (right) of the enclosure.