“
Global Pool Products is committed to engineering and manufacturing world class products in the pool industry
”
Page | 5
POST INSTALLATION CHECKLIST FOR RIP TIDE SLIDE
Installer to review with slide owner upon completion of slide installation.
Examine:
The flume for any apparent cracks or gashes.
The ladder for sharp borders, snags, cracks, or gashes.
All fasteners to make sure none are loose.
The ladder for stability and connection to the flume.
Pool water depth at the base of the slide should be at least 3’ (914 mm) deep
.
Th
e height of the slide flume exit above the water should be 20” (508 mm) maximum.
The distance between the slide centerline and the edge of other pool equipment should be at
least 3’6” (1067 mm).
DAILY/WEEKLY MAINTENANCE OF THE RIP TIDE
A.
Spray your Rip Tide Slide down with water to wash away build up.
B.
Be sure that all connection points are tight. If not, tighten anchors as necessary.
C.
All polyethylene parts require little maintenance. Hose and wipe to clean.
Examine:
The flume for any apparent cracks or gashes.
All fasteners to make sure none are loose.
The ladder and inner flume for sharp borders, snags, cracks, or gashes.
APPLICABLE STANDARDS AND CODES
The Rip Tide must
be installed following your local building codes and national building codes.
ASSEMBLY AND INSTALLATION
Rip Tide Slides are inspected prior to shipment from the factory. The installer will need to make sure
that the concrete pad meets requirements before taking any steps to install the slide. Global Pool
Product’s warranty will be voided if the
Rip Tide is not installed and constructed per the installation &
assembly guide.
