Global Mei Chuang T38, Руководство по эксплуатации

Страница: 3 / 9

Before Use the device
Removing the belt clip
Before insert batteries into the device, first pull the belt clip latch away from the
device.
Installing the Batteries
A, FOR USE OF NON RECHARGEABLE BATTERIES:
1, Slid down the battery compartment cover.
2, Insert 3* AAA Alkaline (Not included)
3, Position the batteries according to the polarity making on the battery
compartment.
4, After placing batteries into correct positions, replace the battery cover.
B,
FOR USE OF RECHARGEABLE BATTERIES WITH USB CABLE AND ADAPTER
1, If your walkie talkie comes with rechargeable battery pack, USB cable and
USB adapter or USB car charger, you should only use the battery pack provided
to charge. It cannot charge other type rechargeable batteries.
2, After placing batteries into correct positions, replace the battery cover.
3, The fully charging time is about 12hours.
Using the device
1, Turning the device on/off
Switch on the device: Press and hold on the 3 seconds then you will hear a
beep sound.
Switch off the device: Press and hold on the 3 seconds then you will hear a
beep sound.
2, Adjusting the volume
To increase the volume, press the Up
▲
button. And press the Down
▼
button
to decrease the volume.
3, Low Battery Indication
The device can detect the low battery level when the battery voltage goes low.
When battery voltage is low, the battery icon will flash and a beep will be heard
to indicate that the batteries need to be replaced.
4, Receiving/transmitting communications:
The devices are in “Reception” mode when it is turned ON and no transmitting.
When a signal is received on the current channel, the LCD will display in
reception.
When you press the PTT (push to talk) button, the devices switches to