4
Specifications
Engine:
26cc, 2 Stroke
Speed:
0 - 2200min
-1
Depth of cut:
10mm, 20mm, 30mm
Size of blade:
180mm
Bore size:
18mm
fuel type:
Unleaded
Fuel mixture:
Unleaded petrol / oil (40:1)
Fuel tank capacity:
700ml
Equivalent Spark plugs:
NGK BM4A
CHAMPION CJ14
DENSO W14M-U10
BOSCH WS8E
Sound pressure value:
119db(A)
Weight:
7.5kg
Safety instructions
WARNING.
Read and understand all instructions. Failure
to follow all instructions listed below may result in electric
shock, fire and/or serious injury. The term “power tool”
in all of the warnings below refers to your mains-operated
(corded) power tool or battery-operated (cordless)
power tool.
Save these instructions
Work area
•
Keep work area clean and well lit.
Cluttered and dark
areas invite accidents.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust.
Power tools create sparks
which may ignite the dust or fumes.
•
Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
Personal safety
•
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do
not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result
in serious personal injury.
•
Use safety equipment.
Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
•
Remove any adjusting key or wrench before turning
the tool on.
A wrench or a key that is left attached
to a rotating part of the power tool may result in
personal injury.
•
Do not overreach.
Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
•
Dress properly.
Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
•
If devices are provided for the connection of dust
extraction and collection facilities ensure that these
are connected and properly used.
Use of these devices
can reduce dust-related hazards.
Power tool use and care
•
Do not force the power tool.
Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
•
Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
