Focus Adjustment
Should you need to adjust the focus please follow one of the below methods:
A. Cameo fitted with dot optic (S/C2/HG lens)
1. Insert focus key into laser barrel and align with focus control groves.
2. Turn the focus key until desired focus is achieved.
B. Cameo fitted with a P lens
1. Taking care not to touch the lens itself, grip the lens assembly at the front of the laser.
2. Turn until the beam is the desired size.
C. Cameo fitted with projection optic
1. Remove any external optics, where fitted (see drawing B).
2. Insert focus key into laser barrel and align with focus control groves.
3. Turn the focus key until desired focus is achieved.
4. Replace the external optics if fitted and rotate to achieve the desired projection.
5. Adjust tilt angle and then tighten Allen screw B
6. Loosen 2 x M4 screws attaching swivel bracket to base
7. Adjust swivel angle and then tighten 2 x M4 screws remains with the user.
Mounting the Acculase in the Pillow Block Bearing Mount (See Drawing E)
1. Secure the mount to your workbench or surface using the 20 x 11 mm oval slots in the base
2. Unscrew the M6 or M8 socket head screws to remove the clamp from the base
3. Separate the black mounting cylinder from the spherical rolling element
4. Insert your laser into the mounting cylinder
5. Replace both halves of the spherical rolling element around the cylinder and hold in place
6. Position the spherical rolling element and mounting cylinder in the curved section of the clamp
and hold in place
7. Replace the other half of the clamp and hold in place
8. Screw the M6 or M8 socket head screws through the clamp and into the base
9. Manually adjust the direction of your laser
