Global Industrial HEPA 641808 Скачать руководство пользователя страница 4

4

f

HEPA Wet/Dry Vacuum

OPERATION INSTRUCTIONS

WARNING

DO NOT use vacuum to suck 

or blow burning or flammable 

material or otherwise hazardous 

chemicals

1.  To turn vacuum on, set the power switch located at the front of 

the vacuum cover to "vacuum". When turning vacuum on, make 

sure it is properly plugged in first while it is still off. Turn switch off 

before unplugging after finishing vacuuming, or when changing 

accesories.

2.  To connect hose to vacuum, insert end of hose into air inlet at 

the left of the vacuum cover and rotate hose end clockwise until 

locked. To remove, rotate counterclockwise and then pull.

3.  To use blower, insert end of hose into air outlet at the right of 

the vacuum cover and rotate hose end clockwise until locked. To 

remove, rotate counterclockwise and then pull. To use blower, set 

power switch to "vacuum".

4.  To connect wet/dry nozzle to hose, insert end of hose into 

brush outlet and rotate clockwise until tight. To remove, rotate 

counterclockwise and then pull.

5.  To use tire inflator, connect inflator tube to tire valve stem and 

tighten. Press the setting button and set the desired tire pressure 

on the display screen. Set the power switch to "inflator" to begin 

inflating tire. Pump will stop automatically when desired tire 

pressure is achieved. 

6.  Clean the vacuum tank after every use. To access the vacuum tank, 

remove the vacuum cover by opening the two side clamps and 

pulling the cover up and out of the tank. Dump the contents of the 

tank. If contents of the tank are wet, clean and dry the tank after 

discarding contents.

7.  Clean the HEPA filter after every use. To access the filter, remove 

the vacuum cover buy undoing the the two side clamps and 

pulling the cover up and out of the tank. Turn the filter locking 

knobs counterclockwise and remove the filter. Clean the filter 

under cold, running water. Do not use detergents or soaps to 

clean the filter. DO NOT DAMAGE SAFETY VALVE WHEN REMOVING 

FILTER.

Vacuum

Blower

Vacuum

Inflator

Stop

Switch

8888

Inflator

Display

Side 

Clamps

Trash

HEPA 

Filter

HEPA 

Filter

Отзывы: