2
In-Ground Steel Bench
Without Backrest
H2
User Manual
REF. 2
REF. 1
H3 (x8)
H1 (x4)
H4 (x4)
REF. 3
REF. 2
1.
Attach both Legs to the Bench, using the hardware provided. Use images below as reference.
2.
Attach leg supports to both legs and bench top (3 points) with the hardware provided. Use images below as
reference.
3.
Insert 2 steel bars (Ref 4) through each leg. Steel bars must be
symmetrically placed in order to function adequately during in-ground installation.
Steel bar must remain symmetric while in leg.
1. Dig a hole 24" deep and 9~10" in diameter.
2. Layer the bottom with 6" of gravel. Ensure gravel is well packed.
3. Mix concrete using proper sand/cement ratio.
4. Insert legs to base and apply concrete to its surroundings.
5. Ensure steel bars stay symmetric while concrete is poured.
6. Use level to ensure level installament.
7. Allow concrete to cure completely.
A
B
B
A
1
Assembly Instructions
2
In-Ground Installation
REF. 4
