2
Aluminum Park Bench
Without Backrest
Step 1:
Connect the 2 support tubes
(Ref. B) with both legs (Ref. A)
with bolts (Ref F). Do not fully
tighten.
Step 2:
Place both support ribs (Ref.
E) evenly spaced on top of the
support tubes.
Step 3:
Insert and connect both end
slats and slats (Ref. C and Ref. D)
in between the legs with screws
(Ref. H) on both ends. Do not
fully tighten.
Step 4:
Flip bench over and screw down
the support ribs with the self
drilling screws (Ref. G). Flip
bench with legs down and fully
fasten all screws
NOTE: Mounting hardware is
not included.
User Manual
