Global Fire Equipment UG-7/STD-H Скачать руководство пользователя страница 4

Страница: 4 / 4

MOUNTING IN PLACES WHERE POSSIBLE CONDENSATION

PROBLEMS COULD ARISE, E.G. COLD ATTICS OR OUTDOOR

MOUNTING BRACKET FOR CIRCULAR OR INSULATED RECTANGULAR DUCTS

Using the mounting bracket the diameter of the duct can be as small as 100mm.

The mounting bracket is supplied with a rubber gasket and sealing sleeve.

FINAL CHECKS

●

Check that the UG-7 is correctly installed according to the air flow in the duct.

●

Check that the plastic plug of the test hole is properly installed.

●

It is recommended that smoke from a smoke generator is introduced into the duct to check the detector’s function.

According to WEEE (Waste of Electrical and Electronic Equipment) directive, you must at the end of life of the product

dispose of it separately at an appropriate collection point and not place it with unsorted waste.

MORE INFO >>

GLOBALFIRE-EQUIPMENT.COM

Содержание UG-7/STD-H

Страница 1: ...6m 1 5m or 2 8m 1 6m extension tube available ORDER CODE UG 7 STD H SMOKE DETECTOR HOUSING HIGH LID MOUNTING AND POSITIONING The Uniguard should be installed according to the drawing below The Uniguar...

Страница 2: ...he pipe and the detector on the duct 2 Secure the bottom of the Uniguard with the three screws positions marked 5 ELECTRICAL INSTALLATION 1 Remove the cover over the connection housing four screws 2 U...

Страница 3: ...aerosol When alarming the LED lits red on the detector and when service alarming contamination it lits green IMPORTANT Reassemble the test hole plug NOTE Do not drill any holes in the cover for signs...

Страница 4: ...CHECKS Check that the UG 7 is correctly installed according to the air flow in the duct Check that the plastic plug of the test hole is properly installed It is recommended that smoke from a smoke gen...