Email or SMS Alerts
Starting with firmware version 1.1.1, the interface can send alerts by SMS or by email, or in both modalities. For alerts to be
enabled, you must make the respective settings. The alerts you receive, is a short text message describing what originated
the alert, and identifies who sent by the client ID and channel configured in the interface. The alerts you can receive are as
follows:
●
When the interface starts communications with the internet broker (external server).
●
When the panel on fire, and also when I came out of the fire alarm.
●
When the panel fails and then when I left the failed state.
●
When the panel disabled and then when I left that state.
●
When the panel a pre-alarm or when I'm out of that state.
●
When the panel test mode or then when I left like this.
●
When communication begins with the panel and the System LED is turned on.
ATTENTION:
There are no guarantees of receiving alerts. If the connection to the mail or SMS server is not possible,
the alert will not be sent, but the interface continues with its normal operation. For SMS server detailed function
please check
for further info.
Service
(SMS)
1) Access to client area and, after register and login, go to Workspace
2) Verify or add in “Test Phones” all desired phone numbers to be used
3) Go to “Channels->SMS” and on “My SMS Setups” add the new user/interface, it will be shown the
API KEY needed to be configured on the interface
.
Firmware update by micro SD card (recommended method)
You can update the interfaces firmware with a micro SD card, format FAT32, the procedure is as follow:
1)
Save the update firmware file "
upgrade.bin
" to the micro SD card.
2)
Turn interface power OFF, and insert the micro SD card into its socket.
3)
Turn interface power ON. If the file is valid the update starts Automatically.
INT-TCP/IP-WEB / CONFIGURATION MANUAL / © GFE 210622
9
