background image

© Global Cooling, 2009 

10/29/2009 

Version 1.2u

 

17 

WARRANTY 

 

GLOBAL COOLING INC., as the Manufacturer warrants the quality of all parts used in the 
construction of the ULT25 to be free from defects to the original purchaser. 
 

1.

 

This WARRANTY shall continue for one year from the original delivery date, i.e. one 
year from the time of delivery to the shipper (e.g. UPS, Fed Ex, 

etc).

 

2.

 

This WARRANTY shall have force and effect only if all items are operated in 
accordance with instructions provided by the manufacturer. 

3.

 

This WARRANTY shall not extend to ordinary wear and tear. 

4.

 

This WARRANTY shall not extend in any way to liability (whether or not construed 
on tort or contract or any other theory of law) to consequential damages resulting from: 

 

Ordinary use of the product 

 

Abuse or misuse of the product 

 

Interruption or cessation of the operation of the product from any cause whatsoever, 
including but not limited to power failure, low voltage, acts of God, explosion, 
negligent operation and the like. 

5.

 

This WARRANTY shall extend only to furnishing for replacement a part found by the 
manufacturer to be defective. 

6.

 

This WARRANTY shall not extend nor cover any part used as a replacement part 
beyond the original one year product WARRANTY: nor does the manufacturer 
undertake any obligation in connection with this WARRANTY other than that 
specifically set forth above. No person is authorized to make any representation as to 
this WARRANTY except duly authorized officers of Global Cooling Inc.  

7.

 

Global Cooling Inc. agrees if instructions as to operation and use are strictly followed, 
and power sources (circuits, voltages, etc.) are properly applied, to provide within one 
year after original delivery to the shipper, labor free of charge to maintain the product 
in good working condition. 

8.

 

The customer will pay for the cost of returning the freezer to Global Cooling Inc (or to 
the distributor if approved by Global Cooling Inc).   Global Cooling Inc will pay for 
the cost of returning the freezer to the customer,  unless examination of the freezer 
demonstrates that the freezer was damaged by operation or handling outside the 
instructions provided by the manufacturer. 

9.

 

This WARRANTY is limited to products purchased and used in the United States of 
America.  

 

 

“Consequential damages” shall be defined to include, but not limited to spoilage of., or damage to 

contents placed in the product, loss of profits, expenses of delay resulting from interruption or cessation of the 
operation of the product, loss of customers or business good will, any time element loss, or any other special 
damages. 

 
ALL WARRANTY returns MUST be decontaminated according to current laboratory 
protocols appropriate for any Bio Hazards which were contained in the freezer.  A list of 
all Bio Hazard agents which had been contained in the freezer and a copy of the 
decontamination protocol used must accompany every freezer returned for repair. 

 
Global Cooling Inc reserves the right to change all specifications for the mechanical, physical 
or firmware portions of this product without notice.

 

Содержание ULT25


















Отзывы: