Global Caché
“Crossover” setting. The default setting of
False
puts the Serial cable in standard mode. To
change to crossover mode, select
True
, then
select
Save Changes
to apply the new settings.
Disconnecting the Serial cable from the Flex
Link Port will reset all open TCP sockets and
reinitialize the Serial cable. All connections
must be reestablished after unplugging the ca-
ble from the port.
Troubleshooting.
See the iTach Flex Quick
Starts or visit our website for more information
on configuring Flex devices.
*To download the
iHelp
application visit
www.globalcache.com/downloads
. Run iHelp
on a Windows PC that is connected to your
network.
Global Caché, Inc.
160 East California Street
PO Box 1659
Jacksonville, Oregon 97530
Phone (541) 899-4800 - Fax (541) 899-4808
www.globalcache.com - [email protected]
Copyright ©2013 Global Caché, Inc. All rights reserved.
PN: 022213-03 ver.2 Information subject to change without notice.
This device complies with Part 15 of FCC rules and with
ICES-003 of Industry Canada. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference
Made in the U.S.A.
Quickstart_FLCserial_1up_062713.indd 2
7/1/2013 12:56:09 PM
