Flex Link Serial Cable
Quick Start
Global Caché
is lessening our carbon
footprint by reducing our paper
output. For complete documentation
and tutorials, visit:
www.globalcache.com/docs
Getting Started.
Once the iTach Flex is
connected to the network by either an Eth-
ernet cable or WiFi, plug the Flex Link Se-
rial cable into the Flex Link Port.
To configure Serial cable fuctionality, right
click on the unit entry in
iHelp*
and click
configure. A web browser will present the
web configuration pages of the Flex. To
access the set up pages manually, type in
the unit’s IP address. Flex units in de-
fault will reside at the default address of
http://192.168.1.70
. On the “Flex Link
Port Configuration” page, select “Flex Link
Serial Cable” to configure the settings as de-
sired.
Flex Link Serial cables can be set to either
standard (straight through) or crossover
(null modem) modes by changing the
Quickstart_FLCserial_1up_062713.indd 1
7/1/2013 12:56:09 PM
