5)
Use the “ST/STP” button to set the minutes.
6)
Press the “MODE” button. The second digit(s) will be flashing.
7)
Use the “ST/STP” button to set the seconds.
8)
Press the “MODE” button. “REPEAT” will be displayed at the top
of the screen and “ON” or “OFF” will be flashing at the bottom.
9)
Use the “ST/STP” button to select REPEAT “ON” or “OFF”
10)
Press the “MODE” button. “REMIND” will be displayed at the top
of the screen and “ON” or “OFF” will be flashing at the bottom.
11)
Use the “ST/STP” button to select REMIND “ON” or “OFF”
12)
Press the “SET/RST” button to save programmed information.
Note:
When setting the Countdown Timer(s), if programming is
interrupted and no button is pushed within 2 minutes, the flashing
will stop and the settings that are shown on the screen will be held.
Finish programming by repeating Step 2 and continue as needed.
Countdown Time remains on the display. Press the “MODE” button
to rotate to Calendar Mode.