GLOBAL ASSISTIVE DEVICES GLOBAL 360, Инструкция по эксплуатации

Страница: 2 / 13

alarm and countdown timer. The clock display will
not light to save battery energy.
Note: If you have a long power failure you may
need to make a slight adjustment to the clock time
after the AC power returns.
To activate the battery backup function, open the
Circular Battery Door located on the bottom of the
clock by a turn counter clockwise and pull the
protective plastic tab out.
Note: Replace Battery as required.
The life expectancy of CR2032 battery is
approximately 2 years.
SETTING THE CLOCK TIME
Slide the SET MODE switch to
“TIME”
position.
Press and Hold the SET button and press the
HOUR button to set the hours.
Note: When using the 12 Hour Clock, note the
Yellow PM INDICATOR LIGHT located at the top
left of the clock display for accurate setting. When
the clock is reading PM time, the light will be "on".
The light will be off when the clock is reading AM
time.
Press and Hold the SET button and press the
MINUTE button to set the minutes.