VIBRATE position will activate the VIBRATOR
jack and cause the connected “Vibes” Bedshaker
to vibrate.
ALL position will activate the audible, vibrate and
flashing lamp. If you do not want the lamp to
flash, slide the lamp switch (located on the back
top right of the clock) to OFF.
Alarm indicator light marked AL (located on the left
of the clock display) will illuminate when any mode
of alarm is set.
ALARM/ALERTING OPTIONS:
Audible: You can select the Volume and Tone that
you require or want by rotating the dials on each
side of the unit. VOLUME can be set from 0 dB
(no sound) to 90 dB (very loud). Indicator dial on
face of unit confirms setting. TONE is adjustable
from Low to High to provide you with the optimum
results.
Vibration: Connect a 12 Volt Bedshaker
(purchased separately) to the back of the unit
