„
Cabinet Installation
Supporting rails, rack trays, or slide rails can be implemented using the
four mounting holes on the sides of the chassis. The eight mounting
holes in the two handles on the sides of the chassis are shown below.
Figure 31:
Fan Bracket Thumbscrews
Step 3:
Unplug the power cable that is connected to the fan.
Figure 34: Four Mounting Holes
NOTE:
If the system is running critical applications, please find the
appropriate time to backup data and properly shut down the
system.
„
1404150 ATX Installation
Global American, Inc also offers the 1404150 ATX chassis that is
compatible with motherboards.
Figure 32: Disconnect the Fan Connector
Step 4:
Remove the four retention screws in each of the four
corners of the fan that must be replaced.
Step 5:
Replace the fan and secure the new fan to the bracket
with the four previously removed retention screws.
Step 6:
Reinstall fan bracket into the chassis and secure the fan
bracket to the chassis with the previously loosened
thumbscrews.
Step 0:
„
Fan Filter Replacement
To replace the fan filter, please follow the steps below.
Step 1:
Open the front panel.
Step 2:
Remove the four thumbscrews on the fan filter bracket.
The compatible Global American, Inc motherboards are listed in
Table 4
below:
Form Factor
Model No.
PSU Connector
ATX
2801310
ATX
Micro ATX
2801270
ATX
Micro ATX
2801320
ATX
Micro ATX
2801250
ATX
Micro ATX
2801330
ATX
Mini – ITX
2801340
ATX
Mini – ITX
2801260
ATX
Mini – I TX
2801280
ATX
Mini – I TX
2801230
ATX
Table 5: Compatible Global American, Inc Motherboard
To install a motherboard, follow the steps below:
Step 1:
Mount two 6cm fans onto the rear panel for motherboards.
Make sure the fan power cables are at the bottom of the
fans.
Figure 33: Fan Filter Bracket Retention Screws
Step 3:
Replace the filter pad inside.
Step 4:
Secure the fan filter bracket back to the front panel of the
chassis with the four previously removed thumbscrews.
Step 0:
NOTE:
The two 6cm fans are optional items.
1404150 QIG
Page 1 1
