Gliderol Roll.in.One, Руководство по установке

Страница: 2 / 15

ROLL.in.One Installation Instructions & O wner’s Manual Page 2
Roll.in.One Automatic Roller Door Operator
IMPORTANT SAFETY INFORMATION - PLEASE READ CAREFULLY
SAFETY INSTRUCTIONS
WARNING!: To reduce the risk of severe injury or death
⚫
Never let children operate or play with the doors controls
⚫
Keep the remote control away from children
⚫
Always keep the moving door in sight and away from people and objects until it is completely closed.
NO ONE SHOULD CROSS A MOVING DOOR.
⚫
Do not disengage the door opener to manual operation with children / persons or any other object including motor
vehicles within the doorway.
⚫
The Garage door must be well balanced. Sticking or binding doors can falsely trigger the obstruction sensing of the
Roll.in.One Unit.
⚫
All maintenance should be carried out by suitably qualified personnel.
⚫
Test the door opener monthly. The garage door MUST reverse on contact with a 40mm high rigid object on the floor. The
amount of force the door should encounter is adjustable. Failure to adjust the opener properly may cause severe injury or
death.
⚫
The Roll.in.One Operator has an electronic obstruction system that provides safe and reliable operation. It is however a
legal requirement in some countries to also install a Photo-electric sensor across the door way, please check this
requirement with your local distributor.
Roll.in.One Drive Assembly (Exploded View)
No. Part Description No. Part Description No. Part Description
1 Screw 13 63T Gear 25 Connector
2 Retainer 14 64T Gear 26 Decal
3 Motor Cover 15 C-Ring 27 Bolt
4 Cover_PCB 16 42T Gear 28 Bolt
5 Cover_Limit 17 Shaft 29 Bolt
6 Mounting Bracket 18 Nut 30 21T Gear
7 Release Rope 19 Transformer 31 Washer
8 Release Handle 20 PCB 32 Nut
9 Roller Motor 21 Power Cable 33 21T Gear
10 Screw 22 Wire Mount 34 Drive Wheel
11 PCB Limit 23 Chassis 35 C-Ring
12 Washer 24 PCB Housing 36 Cable
Fig: 1