Glider.it Vettore, Инструкция по эксплуатации

Страница: 8 / 29

8
SERVO BASE
There are several methods to install the hardware inside the fuselage.
We we show you a single plywood base to install re
battery.
Mark a cardboard with fuselage shape (canopy zone); use it to realize the
plywood base (thickness: 5 – 6 mm)
Please consider that we also sell an optional kit of accessories that includes:
- Servo base (plywood – cnc cutted);
- Oval rib – internal fuselage (plywood – cnc cutted);
- Vetronite control horns;
- PLA (3d printed) servo base for ailerons/flaps.
Before gluing the base, test the right position of rudder servo, battery,
receiver etc.
The plywood base needs to be glued to the fuse at about 3 cm down from the
edge of the canopy (see the picture)