Start Charging
There are two ways to charge the battery:
“rapid charging”
, in which
the battery is charged in a short time, and
“refresh charging”
, in which
the battery is charged while recovering the battery performance.
Rapid Charging Procedure
1.
Turn on the power after installing the battery. If the battery
temperature is appropriate, the charging light (green) will light,
and charging will start. Charging is completed in approximately
one to two hours.
2.
When the battery temperature is (40 C or above) or low (0 C or
less), the stand – by light (yellow) will light until the battery
reaches the appropriate temperature. When the battery
temperature is appropriate, the charging light (green) will light,
and charging will start automatically. The stand-by time will
vary depending on conditions, but it will take approximately one
to two hours.
3.
When charging is completed, the charging light (green) will go
out automatically.
Caution
Do not charge a battery that is already charged. The temperature
will increase and it will shorten the life of the battery.
Caution
As the deterioration of the battery advances, some of the display
lamps no longer light, even though the charger has been completed.
First the 5
th
light fails to light, then the 4
th
, and so on. If the 5
th
and
4
th
lamps no longer light after charging has been completed, the
battery should be replaced.
Содержание Rehabilitation Products
Страница 4: ...SECTION 2 STANDARD FEATURES ...
