Glide 4 Series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 26

Glide 4 Series Скачать руководство пользователя страница 10

10

SECTION 6. OPERATING YOUR POWER CHAIR

CONTROLLER

Your new Power Chair has been supplied with the Dynamic Controls control system.
You will have been given instruction on how to operate your controller at time of
specification.

WARNING:

Never push the On /Off button or pad on the control box until you are

seated correctly in the chair and have your hand on the control box.

IMPORTANT:

Please familiarise yourself with the individual functions of your

controller in particular the On/Off button or pad. The control systems have an On/Off
button or pad that operate by pressing once for ON and pressing the same button or pad
again for OFF.

1.

Do not displace the joystick when pressing the On button or pad.

2.

Never press the On/Off button or pad while driving your power chair.

3.

To avoid damage to motor gearboxes always come to a complete “stop”
before turning your power chair off.

ARMREST

Armrests are removable. With those chairs fitted with adjustable height arms they are
incrementally adjustable in height. To adjust, simply depress the two button locks
located on outside of bottom frame, move to desired height and ensure that button locks
“spring” back into the holes nearest to your desired height.
To remove armrests from chair, simply depress button lock in front armrest mounting
socket and lift armrest out. See

Figure 3.

FOOTRESTS

The footrests are swing away and detachable. They swing out by either pushing or
pulling the release lever.
The type of release lever fitted to your chair depends on your ability and footplate type
fitted to your chair.
When lever is released the footplate will simply swing out and lift off the two locating
pins.
When refitting footrest to chair ensure that it is located on both locating pins. Damage
may result if only one pin is used.
HEIGHT ADJUSTMENT OF FOOTPLATE
Your footplate will be fitted with one of two types of adjustment styles.

1.

Clamp Type – to adjust height simply undo clamp bolt, move to desired
position, retighten clamp bolt.

2.

Incremental Hole Type – to adjust height simply un - do and remove bolt,
move footplate to nearest hole to suit desired height, replace and tighten bolt
firmly.

«
...
8
9
10
11
12
...
»

Содержание 4 Series



























Отзывы:

Нет отзывов