COMMERCIAL
ALLUMINUM REEL SYSTEM
FOR INGROUND POOLS
5. Positioning Your Solar Reel:
For Rectangular pools, place Wheels at either end of pool.
For Irregular shaped pools, place Wheels at some convenient midway point. You will need to
fold Blanket and allow Blanket to unwind in two directions. (See Illustrations below)
6. Trimming Your Solar Blanket:
• Lay your Solar Blanket (not provided) on top of water.
IMPORTANT!
Irregular Shaped Pools will need to have their solar covers folded at point of placement of Reel stands!
The cover will unroll left and right of Reels & cross pole. Please allow 6 inches more material on length to allow for a fold
where straps will be attached for wind onto reel system.
(See Illustrations above)
• With scissors trim blanket to fit shape of pool. Be sure to clear pool edge coping.
RECTANGULAR
IRREGULAR
Unroll
Unroll
Unroll
7. Assembling The Tube Kit:
All Tube Sets consist of 6 sided Hexagon shaped aluminum tubing. There are two diameters of tubing, the smaller size nesting
into the larger size. All Tube Kits
Begin and End
with
Small Tubes
. The Tube Plug Requires
CAREFUL ALIGNMENT!
(See Illustration Below For Proper Plug Insertion)
4. Depending upon the size of your pool you will also require one of the following tube kits:
(Tube Assembly is detailed below and on back cover)
Part #4390012 Tube Kit
Fits up to 12’ width pool
Contains:
(1) 59-1/2" x 2.920" Diameter
extruded aluminum shaft
(2) 59-1/2" x 2.745" Diameter
extruded aluminum shaft
(4) 3.25” Through Bolts
Part #4390016 Tube Kit
Fits up to 16’ width pool
Contains:
(2) 72" x 2.920" Diameter
extruded aluminum shaft
(1) 72" x 2.745" Diameter
extruded aluminum shaft
(4) 3.25” Through Bolts
Part #4390020 Tube Kit
Fits up to 20’ width pool
Contains:
(3) 59-1/2" x 2.920" Diameter
extruded aluminum shaft
(2) 59-1/2" x 2.745" Diameter
extruded aluminum shaft
(8) 3.25” Through Bolts
Part #4390420 4” Tube Kit
Fits up to 20’ width pool
For larger pools and/or heavy
guage solor covers
Contains:
(3) 59-1/2" x 3.920" Diameter
extruded aluminum shaft
(3) 59-1/2" x 3.745" Diameter
extruded aluminum shaft
(10) 4” Through Bolts
(2) 6” Long Aluminum Inserts
(2) 4” Dia. Plastic Tube Inserts
Part #4390024 4” Tube Kit
Fits up to 24’ width pool
For larger pools and/or heavy
guage solor covers
Contains:
(3) 68" x 3.920" Diameter
extruded aluminum shaft
(2) 68" x 3.745" Diameter
extruded aluminum shaft
(10) 4” Through Bolts
(2) 6” Long Aluminum Inserts
(2) 4” Dia. Plastic Tube Inserts
End View
Small
Tubing
End View
Small
Plug
TEETH
ON
PLUG
MUST
ENGAGE
SLOTS
INSIDE
SMALL
TUBING!
1. Congratulation on your purchase of our Commercial Quality Aluminum Reel for In Ground Pools.
Please follow the instructions carefully so as to not void our warranty.
2. Please use your solar blanket and reel assembly in the manner it was intended for:
a. Your solar blanket is not a safety cover
b. Remove the solar blanket and Solar Reel assembly from the pool completely before swimming use.
c. Do not store the solar blanket on the ground in direct sunlight, as it will burn the lawn
3. Preparation & Assembly: Check inventory of all items and assemble as illustrated below:
Crank
Lock
Collar
Plastic Plugs
Stand
Allen
Screw
Allen
Wrench
Aluminum
Tubing
(Depending On Your Pole Set
Pre-Drills & Hardware May Vary)
Axle
Bolt
Axle
Bolt
(2 Pcs.)
Aluminum Tube
Inserts
Lock
Collar
Allen
Screw
Stand
Axle
CASTER
TOOLS
NOTE:
SEE
CASTERS KIT
FOR
CASTERS
INSTALLATION
INSTRUCTIONS!
1/2”
Box
Wrench
3/4”
Open End
Wrench
INCLUDED PARTS LIST
(2) Telescopic
Adjustable height stands
(4) Sealed bearings (installed)
(8) Plastic end caps for stands
(1) Crank handle with grip
& lock collar
(1) Axel with lock collar
(2) Aluminum tube inserts
(2) Axle Bolts with nuts
(1) Allen key for locking collar
(8) Rubber feet
(2) Quick Release Pins
(1) 1/2” Box Wrench
(For Casters)
(1) 3/4” Open End Wrench
(For Casters)
(4) Caster Inserts
(4) Bolts to mount Caster Inserts
(8) Casters
STRAP KIT
(10 Pcs.) Fabric Straps
(1 extra piece)
(11 Pcs.)
Plastic Screw
(1 extra piece)
(21 Pcs.)
Plastic Strap Plate
(1 extra piece)
(1 Pc.)
Hex Driver Bit
(11 Pcs.)
Stainless Steel
Self-Drilling Screws
(1 extra piece)
Plastic Plugs
