Please check carefully that there is no damage caused by transportation.
Should there be any, please consult your dealer and don’t install this
device.
2 Mounting and installation
2.1 Cautions:
for added protection mount the fixtures in areas outside
walking paths ,seating areas,or in areas were the fixture might be
reached by unauthorized personnel.
Before mounting the fixture to any surface ,make sure that the
installation area can hold a minimum point load of 10 times the device’s
weight.
Fixture installation must always be secured with a secondary safety
attachment ,such as an appropriate safety cable.
Never stand directly below the device when mounting ,removing ,or
servicing the fixture, from a ceiling,or set on a flat level surface (see
illustration below).Be sure this fixture is kept at least 0.5m (1.5ft) away
from any flammable (decoration etc.)
Always use and install the supplied safety cable as a safe cable as safety
measure to prevent accidental damage and /or injury in the event the
clamp fails.
2.2 Mounting points:
Overhead mounting requires extensive experience , including among
others calculating working load limits, a fine knowledge of the
