GLG Lighting products
www.goedlichtengeluid.nl
9
Note: when setting [Time] as 0, and not running this scene, and enter into next scene mean you
close the running of this scene.
2.10 Fixture settings [SET]
* At [SET] menu, and press [ENTER] into the fixture parameters settings, [UPLD] is automatically
send, except address code and color correction parameters.
Enter into download and you will need a password, the password is: [UP+DOWN+UP+DOWN],
then press [ENTER] to confirm, if the password is correct, it will show in yellow display, mean it is
sending, when get succeed to send the password, it will show in green display with OK, the slave
receiving the password will show yellow, once it get succeed will show green. When the master get
succeed to send the password, the slave no change or don’t show green display mean it doesn’t get
succeed, then you need to download again.
* [REST] is the factory default parameter settings, press [ENTER] and enter the password
[UP+DOWN+UP+DOWN] then press [ENTER] to confirm. When the fixture get succeed to reset, it
will show OK.
*At [CLRV] press [ENTER] to choose dimming liner mode.
Press [UP/DOWN] to choose.
Liner dimming curve.
Square nonlinear dimming curve.
Nonlinear inverse square dimmer curve.
S-linear dimming curve.
* At [DIM] menu press [ENTER] to choose dimming speed.
