Page 15 of 22
USER CONTROLS FRONT
1.
Main Active LEDs
When on these 2 LEDs indicate that the main audio input is being routed to the output. If
flashing they indicate that the main audio input is being forced by the user to the output and
therefore the automatic switching of the silence detector is being bypassed.
2.
Aux Active LEDs
When on these 2 LEDs indicate that the aux audio input is being routed to the output. If
flashing they indicate that the aux audio input is being forced by the user to the output and
therefore the automatic switching of the silence detector is being bypassed.
3.
Restore Push Switches
Pressing and holding these switches for about 3 seconds will force the associated main input
to the output (The main active LEDs will flash to indicate this). Once in the ‘forced’ mode
another quick press of this switch will return the silence detector to full automatic mode.
4.
Force Push Switches
Pressing and holding these switches for about 3 seconds will force the associated aux input to
the output (The main active LEDs will flash to indicate this). Once in the ‘forced’ mode another
quick press of this switch will return the silence detector to full automatic mode.
5.
Select Push Switch
Pressing and holding this switch for about 3 seconds will allow access to the setup up menu
which once entered will appear on the display. Once in the setup menu each press of this
switch selects the next menu option. (Note to exit the setup menu the ‘Adjust Rotary Encoder’
should be pushed)
1.
Main Active LEDs
4.
Aux Active LEDs
3.
Restore Push Switches
6.
Force Push Switches
7.
Select Push Switches
5.
Backlit Display
2.
Adjust Rotary Encoder
