File 71-10 Page 9
11) SET SUB-ADDRESS MODE:-
Factory Default will not affect the sub-address.
It is possible to allocate a sub address to the box. If the network presents a sub address and
the box has a sub address set, the box will only ring if these sub addresses match.
Switch on while holding "ANSWER" and "#"
"POWER" LED lights immediately to confirm set-up operation.
Release "ANSWER" and "#"
Enter sub-address required to be stored.
Turn the box off. (Turning off without entering a sub-address disables sub-address mode).
12) SET MSN (MULTIPLE SUBSCRIBER NUMBERING) MODE:-
Factory Default will not affect the MSN.
It is possible to allocate an MSN number to the box. If the network presents an MSN number
and the box has an MSN number set, the box will only ring if these numbers match.
Switch on while holding "ANSWER" and "*"
"POWER" LED lights immediately to confirm set-up operation.
Release "ANSWER" and "*"
Dial number required to be stored. (This must be all digits including the area code).
Turn the box off. (Turning off without entering a number disables MSN mode).
13) SET 'ATTENTION' MODE:-
Factory Default will not alter this mode
.
It is possible to sound a 'Beep Beep' noise in the commentators headphones if either the
Codec looses lock or if the ISDN line disconnects.
Switch on while holding "HANG-UP" and "7"
"POWER" LED lights immediately to confirm set-up operation
If the "ISDN LINE" LED is off the Beeps are off.
If the "ISDN LINE" LED is on the Beeps are on.
Press "0" to turn off the Beeps
Press "1" to turn on the Beeps
Turn the box off.