Glensound GS-PM4, Руководство пользователя

Страница: 11 / 20

GS-PM 4 REAR PANEL LAYOUT
1. USB type-C update Port
This USB Type-C connector is used only for device firmware updates. Please
refer to the firmware update section of the manual for a firmware update guide
2. Setup Button
Is used to put the unit in to Setup Mode or Update mode
3. GPIO Port
This port allows external control of the 4 Zone buttons and Indicators, The
GPIO port uses a Female DB9 connector and has
O pen Drain Inputs.
4.
RJ45/Ethercon Network interface
& Activity LED
This is a standard 100Mbps Ethernet IP interface. The amber LED indicates
network activity. The PoE source used to power the device can be a mid-span
adapter or a network switch with PoE.
Page
11
of
20
1 2
3
4