Glensound DANTE Vita Mini, Детали продукта, Страница: 20 / 33

Page 20 of 33
Running Dante® Controller
At the time of writing this manual, Dante® Controller looks as per the screenshot below:
The Vita Mini will have been named at the factory during test to allow them to be
identified by the Dante controller.
The format used for the factory name is:
‘Vita Mini-serial-XXX-YYY’. ‘XXX’ will be the units 3 digit serial number, and ‘YYY’ will be
the Vita’s MAC address.
Dante® Controller TIP
If you have never run Dante® controller before then make sure that on the bottom left
of the Dante® controllers’ screen ‘P’ or ‘S’ is next to a green square as this indicates that
it is connected to a network. By clicking ‘P’ or ‘S’ a pop up box opens to allow you to set
what network interface the controller is using.