Glensound Dante BEATRICE R16 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 34

Glensound Dante BEATRICE R16 Скачать руководство пользователя страница 24

Page

24

of

34

CONNECTING THE BEATRICE UNITS TO A DANTE NETWORK

The Beatrices are network audio devices utilizing the reliable and versatile Dante audio
over IP protocol. Dante is a proprietary system (although very widely used) the
originators of which are Audinate.

The information below is only meant as a very basic guide. Full details of the power of
Dante network audio and instructions for using it can be found at

www.audinate.com

Getting Dante Controller

If you are connecting the Beatrice to a new Dante network the first thing you will need
to do is to get the free Dante controller software from Audinate.
This can be downloaded by visiting Audinate’s web site at

www.audinate.com

Connecting Beatrice To The Network

Beatrices can be connected to the network that you are going to use for your audio
distribution simply by plugging in either, and, or any of the network connections on
the rear. Once connected to the network it will be possible to see the Beatrice from
within the Dante controller and route its’ audio circuits.

Audio Over IP Network

We strongly recommend that you consider your network topology carefully and would
not recommend sharing broadcast audio and general data on the same network.

For more details of audio over IP network structure please visit

www.audinate.com

«
...
22
23
24
25
26
...
»

Содержание Dante BEATRICE R16



































Отзывы:

Нет отзывов