Page
24
of
33
AES67 MODE
The Beatrice uses a chipset from Audinate called Ultimo for its network audio
interface. Audinate are the company behind Dante
TM
and as such the
chipset’s
primary network audio protocol is Dante, however Audinate have enabled their
module to comply with AES67 and therefore the Beatrice can be set to AES67 mode
for interaction with other AES67 devices.
Please note however that Glensound are relyin
g on Audinate’s AES67 interface and
are unfortunately not able to provide full AES67 support for the unit. AES67 support
should be sought directly from Audinate.
Turning On AES67 Mode
If you want to use your Beatrice on an AES67 network and it has not been set to
AES67 mode then this can be set in Dante controller by double clicking the Beatrice
to open the Device View window where you will find an AES67 tab to enable AES67
support.
Once the AES67 drop down box has been enable
d you’ll have to reboot the Beatrice
for the change to take effect. After the reboot go back to the AES67 tab and set the
multicast prefix address to one that is suitable for your newtork.
Содержание BEATRICE M1
Страница 20: ...Page 20 of 33 AUDIO BLOCK DIAGRAM...