©2015 Glenair, Inc.
REV: 9
US Cage Code 06324
Printed in USA
GLENAIR, INC.
∙ 1211 AIR WAY
∙ GLENDALE, CA 91201-2497
∙ TEL: 818-247-6000
∙ FAX: 818-500-9912
PAGE 11 of
15
E-mail:
050-352 Product Brief
PCB Mount Transceiver
10 Mbps
– 200 Mbps, SMF, 3.3V
Application Support
To assist in the transceiver design and evaluation process, Glenair offers the following aids:
Evaluation board & Product Manual, part number 050-329, which facilitates in the testing of the PCB Mount
Transceiver.
3D Step file to support modeling of mechanical fit and routing
PADS schematic and PCB layout library files that can be exported into customer’s PCB software design program
Applications Aid Example of PCB layout including details of high speed transmission designs
Customer Manufacturing Processes
This module is mounted with screws and interfaces with a high-speed low cost surface mount electrical connector residing
on the host PC board. The PCB Mount Transceiver is not designed for aqueous wash, IR reflow, or wave soldering
processes and should be mounted on the host board after host PC board has been through these processes.
Proper torque values for mounting screws must be observed. Please contact Glenair for hardware mounting process
recommendations.
