l
To o
press the button and
lift upward. To close press down the
lid firmly.
l
Remove all packaging, stickers or
other accessories from the inside
and outside of the kettle.
l
Adjust the length of the cord by
winding it under the base. Wedge
the cord in the slot.
pen the lid
l
Place the kettle on a clean, cool and
smooth surface.
l
Fill the kettle with the required
amount of water. Connect to the
mains and turn on the switch. The
LED indicator glows .
l
The kettle will turn off automatically
once the water has boiled.
l
Ensure that the kettle has stopped
automatically or turn it off manually
before pouring the hot water in the
cups.
IDENTIFY YOUR TRAVEL KETTLE GL 9009
USING YOUR TRAVEL KETTLE
l
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliances by a person responsible
for their safety.
l
Children should be supervised to
ensure that they do not play with the
appliance.
l
Do not place the kettle on or near
slippery or hot surfaces.
l
The kettle must be used with its
original base only.
SAFETY PRECAUTIONS
Filter Mesh
2 Travel Cups
& Spoons
Lid
Switch
Handle
Gauge
Power
Indicator
Plastic
Body
Cleaning
l
Unplug the kettle and allow to cool
down, then clean with a soft damp
sponge.
l
Never immerse the kettle in water.
l
Never use abrasive cleaning pads.
l
The kettle is provided with a
removable mesh filter. Remove and
clean the filter under running tap
water.
Descaling
l
Descale the kettle once a month.
l
To descale, fill the kettle with half a
litre of vinegar and leave it to stand
for 2 hours without heating.
l
Any spots remaining inside can be
cleaned up with a damp cloth.
l
After descaling empty and rinse the
kettle 5-6 times before using.
Repeat if necessary.
Note : The travel kettle is designed
to work on both 110 & 220 V supply.
To set the kettle as per available
power supply, adjust the
provided at the bottom of
the kettle, as shown in the figure.
Please be careful not to operate at
240V with selector at 110V. In this
case the kettle will get damaged and
the same will not be covered under
warranty.
voltage
selector
110-120V
220-240V
l
Use the kettle only for boiling water.
l
Do not fill it above the maximum
level or below the minimum level.
l
Do not use the kettle without water.
l
Never lift the lid when the kettle is in
function.
l
When using the kettle for the first 2-
3 times, throw away the water
because it may not be very clean.
l
When the kettle is not in use, ensure
that the power is off .