8
USING THE DRY GRINDER JAR
Place the grinder jar
on to the drive and rotate
anti-clockwise to lock.
Add the ingredients to be
processed. Place the lid on
top of the grinder jar
and press down to close.
Hold the lid firmly during
processing to avoid
spillage.
The grinder jar should not be
filled more than 2/3 of the
jar capacity. Switch ON the
machine and turn to
position 1 and gradually to
higher positions if required.
Give a break of 1 minute after
three minutes running.
Once the operation is
complete switch OFF the
machine and remove the
grinder jar by rotating
clockwise. Handle carefully
as it may be hot.
9
Switch ON the food
processor to position 1.
Insert the pre-cut hard
fruits or vegetables to be
juiced through the feeder
tube. Push down with the
pusher. The juice gets
collected in the food
processor bowl while the
pulp accumulates along the
walls of the filter. For
cleaning remove the filter,
shake in a bin and wash
under tap water.
Note :
Remove the pulp &
restart in case of excessive
vibrations during juicing.
Due to vibrations a few drops
of juice may even drop out.
Place the filter mesh inside
the juicer body and rotate it
clockwise using the top
slugs to lock. Place the
assembly on to the drive
shaft.
Place the juicer cover on top
of the food processor bowl
and rotate anti-clockwise to lock.
Position the lid on the
liquidiser side. Place the
bowl on the food processor
drive shaft and turn anti-
clockwise to lock.
USING THE CENTRIFUGAL JUICER
