Rounded Bottom
Pot
Aluminum
Copper Pot
Bottom Measuring
Less than 12cm
Pot with Stands
Ceramic Pot
Glass Pot
Heat-Resistant
Enameled Iron
Pot
Iron or Enameled
Iron Pot
Castiron Pan
Iron Pot
Deep-Fry Pan
Stainless Steel Pot
Iron Plate
Error Code
Reason
Solution
E1
Plate surface temperature
Please contact the supplier or go
sensor open
to a qualified service centre
E2
IGBT
Please contact the supplier or go to
temperature sensor open
a qualified service centre
E3
Abnormal supply voltage;
Check power supply. Switch on
voltage too high
after power supply is back to normal
E4
Abnormal supply voltage;
Please check power supply. Switch on
voltage too low
after power supply is back to normal
E5
Plate surface temperature
Please wait for some minutes until
sensor short-circuited;
the unit cools down. Please
empty pot/pan heating
check pot/pan
leading to too high
temperature
E6
Fan failure; Air intake/
Please contact the supplier or go to a
exhaust vent blockage.
qualified service centre. Clean the vent
after the unit cools down, then restart
E7
Coil panel is not connected
Please contact the supplier or go to a
well; circuit malfunction
qualified service centre
E8
No pot/pan on the plate. Non
Put suitable cooking
-usable pans on the plates
utensils on the plates.
Possible Error Messages and their Solution
Suitable and unsuitable cookware for induction cooking
Suitable Cookware
•
Pots and pans with magnetic bottom, as stainless steel pots with iron bottom, cast
iron enameled pans.
•
Flat-bottom pans and pots with a diameter of 12 to 24 cm with magnetic bottom.
•
Max. weight pot and content should not exceed 6 kg.
Unsuitable Cookware
•
Pots/pans with a diameter of less than 12 cm.
•
Ceramic pots, heat-proof glass.
•
Copper pots and pans, aluminium pots and pans.
•
Cookware with feet.
•
Containers with a curved bottom.
