background image

Safety – overheat protection

For your safety, this appliance is fitted with a thermal cut-out. In the
event that the product overheats, the cut-out switches the heater off
automatically.
To bring the heater back into operation, remove the cause of the
overheating, then unplug or turn off the electrical supply to the heater
for a few minutes.
When the heater has cooled sufficiently, re-connect and switch on the
heater.

Cleaning and User Maintenance

WARNING – ALWAYS DISCONNECT FROM THE POWER SUPPLY
BEFORE CLEANING THE HEATER.

Do not use detergents, abrasive cleaning powder or polish of any kind
on the body of the heater.

Allow the heater to cool, then wipe with a dry cloth to remove dust and
a damp cloth (not wet) to clean off stains. Be careful not to allow
moisture into the heater.

After Sales Service

Your product is guaranteed for three years from the date of purchase.
Within this period, we undertake to repair or exchange this product free
of charge provided it has been installed and operated in accordance
with these instructions.
Your rights under this guarantee are additional to your statutory rights,
which in turn are not affected by this guarantee.
Should you require after sales service you should contact our customer
services help desk on 0870 727 0101. It would assist us if you can quote
the model number, series, date of purchase, and nature of the fault at the
time of your call.
Please do not return a faulty product to us in the first instance as this
may result in loss or damage and delay in providing you with a satisfactory
service.
Please retain your receipt as proof of purchase.

Glen Dimplex UK Limited
Millbrook House
Grange Drive
Hedge End
Southampton
Hampshire.  SO30 2DF

UK customer help line (8.00AM – 6.00PM Mon-Fri; 8.30AM-1.00PM Sat)

Customer Services:

 Tel.

0870 7270101

 Fax.

0870 7270102

 e-mail

[email protected]

Republic of Ireland

 Tel.

01 8424833

The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC)
EN55014, EN60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 73/23 and 89/336

[c] Glen Dimplex UK Limited

All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex UK Limited.

 

Содержание 2570

Страница 1: ...operated when in the upright position as shown Removal of the wall mounting brackets Four identical wall mounting brackets are secured to the base of the heater using one of the foot fixing screws These brackets must be removed before using the heater as follows Lay the heater on its back Following the sequence in Fig 2 identify and remove the foot fixing screw securing the brackets A Slide the br...

Страница 2: ...ore resetting the cut out To reset the cut out switch off or unplug the heater for a few minutes after which normal operation may be resumed Using the heater Before switching on ensure that all packing items are removed read any warning labels carefully and that the feet are fitted or the heater is wall mounted correctly otherwise damage may occur Plug in and switch on at the wall socket The eleme...

Страница 3: ... O see Fig 6 O The heater is OFF but the timer clock continues to keep time whilst the heater is connected to the mains supply and the power is On This position switches the heater ON continuously and overrides any auto timer settings see Fig 7 The heat output will be maximum and thermostatically controlled see Thermostat Fig 7 Fig 8 Switching to auto Check that the clock shows the correct time of...

Страница 4: ...s guarantee are additional to your statutory rights which in turn are not affected by this guarantee Should you require after sales service you should contact our customer services help desk on 0870 727 0101 It would assist us if you can quote the model number series date of purchase and nature of the fault at the time of your call Please do not return a faulty product to us in the first instance ...

Отзывы: