Glen Dimplex Stoves, Инструкция по эксплуатации

Страница: 36 / 48

Installing Your Cooker
33
Stabilising and Securing
Your cooker comes with a stability chain and stability
bracket, this will keep the cooker from moving and will
prevent damage to the flexible hosing at the back of the
cooker. Your cooker must be secured to a wall or a solid
partition behind the cooker.
Your stability bracket
The stability bracket can fitted as follows:
Place the cooker in position and draw a pencil line level
with the front edge.
Remove the cooker and mark off 450mm from the
pencil line to locate the front edge of the lower
bracket.
Fix the bracket to the floor. Measure from floor level to
engagement edge in the back of the cooker and add
3mm.
Assemble the underside of the top part of the bracket
to this height.
See the drawings for the location of the bracket and
the recommended positioning.
Levelling
Once your cooker is secure:
Place a spirit level onto a baking tray, on an oven shelf.
These cookers are fitted with adjustable feet which will
allow you to adjust the height of the appliance until it is
level. The adjustable feet are at the rear of the cooker.
Stability Hook
(not supplied)
Rear of cooker
Firmly fix chain
to cooker rear
Stability chain to
be as short as
possible
Cooker stability chain not designed
with bracket engagement slot
Stability bracket
1 Pencil line
on floor
2 Centre
of range
3
450
mm
Front edge for
lower bracket
4
5 Underside of top bracket
slots into engagement
edge in back of cooker.
Rear wall
Model viewed from rear
Locate stability bracket here
X
Rear
plinths
08 27319 02 - 1100DF 27/9/07 1:23 pm Page 36