11
G. Brightness
Changes the brightness of the
lights in the unit.
→ Adjusted by repeatedly
pressing the corresponding
button on the remote.
• Indicated by the second digit
on the Floating Display™
changing to show: "H" (high),
and "L" (low).
H. Sleep Timer
The Sleep Timer can be set to
automatically shut off the fireplace
after a preset time (from 30
minutes to 8 hours).
→ To set the timer press the timer
button on either the remote or
the unit, repeatedly, until the
desired time is displayed.
• The On Screen Display will
display the different times as it
is adjusted. Once the timer has
begun, pressing the
button
will display the time remaining
before the unit turns Off.
!
NOTE:
The Sleep Timer can
be cancelled at any time by
pressing the
button repeatedly
until the sleep timer displays
nothing.
Operation
holding for 2 seconds will disable
and enable the heater.
!
NOTE:
When the heater has
been disabled and either the
or the
is pressed the On
Screen Display will indicate "--".
F. Color Themes
Different presets of ambient
lighting color combinations
contained in the unit.
→ Changed by repeatedly
pressing the corresponding
button on the remote
or the
unit
.
• Cycles through the different
preset ambient lighting settings
of the unit, this includes
different combinations of
colours of the flame and media
lighting (if applicable).
!
NOTE:
The sixth theme of
the cycle is a prism where the
unit cycles through a variety of
colours. Pressing the
button
stops the cycling and holds
the unit on the preferred color,
indicated by a solid circle. When
the unit is on prism, and is cycling
through the colours, a rotating
circle will be displayed.
