12
www.dimplex.com
Installation
TOWER INSTALLATION
DSHSTAND is an optional tower available for the DSH20W infrared heater. This tower can be installed indoors or
outdoors. If power cables are accessed from the bottom, they can be passed through the inner diameter of the tower.
It is recommended to do this during the second step of installation, when the poles are being assembled. Refer to your
local electrical code for information on the appropriate cables for your application.
WARNING:
The optional tower accessory comes with permanent location mounting brackets that fixes the heater in
place. This helps prevent a tip over, which could result burns and injuries to persons, as well as damage to property
and the heater.
The DSHSTAND contains the following components:
Quantity
A
Hex Wrench
1
B
M6 x 40 Hex Socket Cap Screw
3
C
Base
1
D
Lower Pole
1
E
Middle Pole
2
F
Upper Pole
1
G
Bracket for Single Heater Installation
1
H
Bracket for Twin Heater Installation
2
I
Securing Hardware:
M6 x 16 Philips Bolt
Spring Washer
Wing nut
12
J
Fixing Plate
3
