6
Cooker
hood
5
Cooker
hood
INSTALLATION
INSTALLATION
According to the Fig.3, make sure the position of the hoods on the
wall. Then use the stencil to drill four
Φ
8 holes on the wall. Fix four
sets expanding plugs and screws aimed at the four holes.
Φ
8
Hang the hood and let it's 4 installation holes aim at 4 screws,
Adjust it to setting position.
Fixing the cooker hood
Ensure the power has been turned off before beginning this installation.
3
4
10M
M
10m
m
Please make sure the outside dimension of the screws is 10mm.
5
Screw down the four crews. first screw down the upper two screws,
then screw down the nether two screws.
6
You will need the following tools and material to complete this
installation:
*
Drill
*
Flat head
screwdriver
*
Phillips head screwdriver or cordless drill
and Phillips head bit
*
Tin snips
*
3/8
″
nut driver or ratchet with
extension
*
measuring tape
*
hand saw or jig saw
*
electrical tape
*
duct tape
1. Remove the hood from the carton.
2. Lay the hood upside down on a table covered with cardboard or paper
to prevent scratching of the table or hood.
3. Hood installation should be within 0.8m radius range from the socket.
