Page 6
Your Thermal Storage System is designed
to provide all the hot water you are likely
to need under normal circumstances,
and deliver that hot water at a pressure
comparable with your cold water mains.
This means that you can enjoy powerful
showers without the need for a separate
pump, or fill a bath with hot water in
minutes.
Your Thermal Storage System will ensure
that the energy it needs is minimised,
avoiding costly use of fuel by taking
advantage of off-peak tariffs whenever
they are available.
Hot water is normally available any time
you need it when the system is switched
on, summer or winter.
With traditional systems which have a
cold supply cistern in the roof space,
there is always the risk that the tank could
become contaminated by dust, birds
or insects. The PulsaCoil is connected
directly to the cold mains and therefore
even the hot supply is pure high quality
water every time.
The water in the store never changes
and therefore THE IMMERSION HEATER
ELEMENTS WILL NEVER SCALE UP
DURING THE LIFE OF THE PRODUCT.
As far as the water you use is concerned
scale can be a problem in any of your
domestic products if the water is very
hard in your area.
1. Deliver Hot Water At Good
Pressures Whenever You Need It
2. Operate As Efficiently As Possible
To Cost-effectively Meet Your
Household Needs
3. Delivering High Quality Water To
Every Tap
4. Scale
