GLD Products
X-treme II Dartboard
Item 42-1022A
8
1-800-225-7593
www.gldproducts.com
POWER INSTALLATION
The power supply must be AC to 5V DC, 1000 milliamp (minimum) adapter with the DC
plug polarity con! gured as positive (+) outside and negative (-) inside. To connect the
adapter, plug the DC plug into the DC power jack on the dartboard and the AC plug into an
electrical outlet.
1. The board is not intended for children under the age of 12 years old.
2. The board must only be used with the recommended transformer.
3. The transformer is not a toy.
4. Disconnect the dartboard from the transformer before cleaning.
PROTECTIVE FILM
This electronic dartboard has a clear protective ! lm over the entire display and button
area to prevent scratching during shipping. It is recommended that you remove this ! lm for
easier reading of the display. To remove, simply lift edge, peel off and discard.
WARNING: Not for use by children without adult supervision.
Darts are not toys and may cause injury if used
improperly. Everyone must stand behind the dart
thrower.
IMPORTANT NOTES
1. During shipping or in the course of normal play, it is possible for scoring segments of
this board to become temporarily jammed, resulting in a “frozen” board. If this occurs,
the built-in Self Diagnostic Function of the e-BOARD Computer will be activated
automatically. Your dartboard will run a self-test routine to determine which segment
is stuck. An error message will " ash on the display together with the number for the
“Frozen” segment.
Error Code
Malfunction
99
Stuck ENTER Button
98
Stuck MISS/HANDICAP Button
97
Stuck BOUNCE/SOLO PLAY Button
96
Stuck ON/OFF Button
95
Stuck WRITE/DOWN Button
94
Stuck READ/UP Button
93
Stuck FAVORITE Button
92
Stuck BACK/AUTO CHANGE Button
91
Stuck SOUND Button
90
Stuck START GAME/NEXT PLAYER Button
Segment Number
A segment is stuck